Calibration of the complex matrix effects on the sampling of polycyclic aromatic hydrocarbons in milk samples using solid phase microextraction

Solid phase microextraction (SPME), a simple, fast and promising sampling technique, has been widely used for complex sample analysis. However, complex matrices could modify the absorption property of coatings as well as the uptake kinetics of analytes, eventually biasing the quantification results. In the current study, we demonstrated the feasibility of a developed calibration method for the analysis of polycyclic aromatic hydrocarbons (PAHs) in complex milk samples. Effects of the complex matrices on the SPME sampling process and the sampling conditions were investigated. Results showed that short exposure time (pre-equilibrium SPME, PE-SPME) could increase the lifetime of coatings, and the complex matrices in milk samples could significantly influence the sampling kinetics of SPME. In addition, the optimized sampling time, temperature and dilution factor for PAHs were 10 min, 85 °C and 20, respectively. The obtained LODs and LOQs of all the PAHs were 0.1–0.8 ng/mL and 1.4–4.7 ng/mL, respectively. Furthermore, the accuracy of the proposed PE-SPME method for milk sampling was validated by the recoveries of the studied compounds in two concentration levels, which ranged from 75% to 110% for all the compounds. Finally, the proposed method was applied to the screening of PAHs in milk samples.     

A simple,rapid and reliable liquid chromatography–mass spectrometry method for determination of methotrexate in human plasma and its application to therapeutic drug monitoring

A simple, rapid and reliable liquid chromatography–electrospray ionization tandem mass spectrometry method was established and validated for the determination of methotrexate in human plasma. After a straightforward protein precipitation by acetonitrile–water (70:30, v/v), methotrexate (MTX) and p‐aminoacetophenone (used as internal standard, IS) were separated on a Column C₁₈ column (50 × 2.1 mm, 3 µm; Column Technology, Fremont, CA, USA) using a gradient elution with mobile phase of acetonitrile and 0.03% acetic acid aqueous solution at a flow rate of 0.5 mL/min. The total chromatographic runtime was 5 min for each injection. Quantification detection was performed in a triple‐quadruple tandem mass spectrometer under positive mode monitoring the following mass transitions: m/z 455.3 → 308.3 for MTX and m/z 136.1 → 94.4 for IS. The calibration curve was linear over the range of 0.05–25.0 µmol/L with a lower limit of quantification of 0.05 µmol/L. The intra‐ and interday precisions were <5.2%, the accuracy varied from ?4.1 to 4.5%. The recovery was >94%. The LC‐MS/MS method showed an excellent agreement with the existing HPLC‐UV method using Passing–Bablok regression and Bland–Altman difference plot analysis. The validated LC‐MS/MS can be successfully applied to the routine therapeutic drug monitoring of MTX in clinical laboratories. Copyright © 2015 John Wiley & Sons, Ltd.     

One-Step Nucleic Acid Purification and Noise-Resistant Polymerase Chain Reaction by Electrokinetic Concentration for Ultralow-Abundance Nucleic Acid Detection

Nucleic acid amplification tests (NAATs)integrated on a chip hold great promise for point-of-care diagnostics. Currently, nucleic acid (NA) purification remains time-consuming and labor-intensive, and it takes extensive efforts to optimize the amplification chemistry. Using selective electrokinetic concentration, we report one-step, liquid-phase NA purification that is simpler and faster than conventional solid-phase extraction. By further re-concentrating NAs and performing polymerase chain reaction (PCR) in a microfluidic chamber, our platform suppresses non-specific amplification caused by non-optimal PCR designs. We achieved the detection of 5 copies of M. tuberculosis genomic DNA (equaling 0.3 cell) in real biofluids using both optimized and non-optimal PCR designs, which is 10- and 1000-fold fewer than those of the standard bench-top method, respectively. By simplifying the workflow and shortening the development cycle of NAATs, our platform may find use in point-of-care diagnosis.     

Carbon Encapsulation of High Entropy Alloy Nanoparticles with Extraordinary Coercivity and Saturation at Room Temperature

Owing to their unique properties and technological potential, high entropy alloys (HEAs) have become the subject of great interest in the materials science community. HEAs consist of more than four principle elements in equimolar ratio so their configurational entropy is intrinsically greater than one-principle element based. The increasing surface energy and chemical tendency toward clustering of like atoms at low dimension, however, make production of HEA-nanoparticles (HEA-NPs) extremely difficult. A facile production of HEA-NPs inside carbon nanotubes and nanoparticles is demonstrated in this work. Electron microscopic and elemental analyses confirm encapsulated to be solution phase; some embrace carbides and form multidomains with chemical composition ranging from quaternary to quinary phase. Multidomains and nonmagnetic centers create hardening thus promoting coercivity significantly at room temperature. Alloying induces electron redistribution into high spin states, accounting for observed high saturation. Configurational entropy of encapsulated HEA-NPs lies on a range comparable with bulk.     

芴2,7位取代的9,9’-二芳基螺芴类化合物的合成及性能

设计并合成了一系列以三苯胺为核,芴衍生物为外围基团的有机蓝光小分子,该合成通过Suzuki反应在9-芳基芴的2位和(或)7位引入相同或不同取代基作为模块,并利用Friedel-Crafts反应将4-甲基三苯胺与这一系列模块结合.用NMR,MS和元素分析进行结构表征.荧光测试结果表明该类化合物溶液的荧光发射波长范围在442～466 nm之间,属蓝光发射.电化学测试显示该类材料的HOMO能级位于-5.15～-5.19 eV之间.差示扫描量热仪与热重分析得出化合物的玻璃化转变温度在166℃以上,热分解温度高于398℃,表明该类材料具有良好的热稳定性.     

Biocompatible poly(ethylene glycol)‐poly(γ‐cholesterol‐L‐glutamate) copolymers: Synthesis,characterization, and in vitro studies

A novel amphiphilic poly(ethylene glycol)‐block‐poly(γ‐cholesterol‐L ‐glutamate) (mPEG–PCHLG) diblock copolymer has been synthesized. The mPEG–PCHLG copolymer has good biocompatibility and low toxicity. The mPEG–PCHLG copolymers could aggregate into nanoparticles with PCHLG blocks as the hydrophobic core and PEG blocks as the hydrophilic shell through emulsion solvent evaporation method. The copolymers were characterized by nuclear magnetic resonance spectroscopy, mass spectrum, Fourier transform infrared spectroscopy, and gel permeation chromatography. The particle sizes, size distributions, and zeta potentials of nanoparticles can also be determined by dynamic light scattering and transmission electron microscopy. This work provides a new and facile approach to prepare amphiphilic block copolymer nanoparticles with controllable performances. This novel copolymer may have potential applications in drug delivery and bioimaging applications.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Formation and dissociation of protonated cytosine–cytosine base pairs in i-motifs by ab initio quantum chemical calculations

Formation and dissociation mechanisms of C-C＋ base pairs in acidic and alkaline environments are investigated, employing ab initio quantum chemical calculations. Our calculations suggest that, in an acidic environment, a cytosine monomer is first protonated and then dimerized with an unprotonated cytosine monomer to form a C-C＋ base pair; in an alkaline environment, a protonated cytosine dimer is first unprotonated and then dissociated into two cytosine monomers. In addition, the force for detaching a C-C＋ base pair was found to be inversely proportional to the distance between the two cytosine monomers. These results provide a microscopic mechanism to qualitatively explain the experimentally observed reversible formation and dissociation of i-motifs.